Changing Default Settings - Datalogic LYNX BT Reference Manual

5
5.1

CHANGING DEFAULT SETTINGS

Once your reader is setup, you can change the default parameters to meet your
application needs. Refer to the preceding paragraphs for initial configuration in order
to set the default values and select the interface for your application.
In this manual, the configuration parameters are divided into logical groups making it
easy to find the desired function based on its reference group.
The first three groups are for Cradle parameter configuration:
•
RS232
•
USB
•
WEDGE
•
DATA FORMAT
The following parameter groups are for Gun parameter configuration :
DATA FORMAT parameters regard the messages sent to the Host system.
CAMERA CONTROL parameters regard the control mode managing the camera.
POWER SAVE parameters manage overall current consumption in the reading device.
CODE SELECTION parameters allow configuration of a personalized mix of codes,
code families and their options.
READING PARAMETERS control various operating modes and indicator status
functioning.
CAPTURE IMAGE parameters activate image capturing.
ADVANCED CAPTURE IMAGE parameters define options of the image to capture.
RADIO PARAMETERS allow configuration of radio control parameters.
ADVANCED DATA FORMAT parameters allow advanced formatting of messages
towards the Host.
30
LYNX™ BT