Bracketing - HP Photosmart R817 User Manual

Ofrecido por www.electromanuales.com

Bracketing

This setting allows you to create a set of images with a single
press of the Shutter button, with each image set to a different
value, based upon the Bracketing option selected. Use
Bracketing when you want to try variations on an image. For
example, using the Color option, you could capture a single
scene in color, in black and white, and in sepia for an old-
fashioned look.
1. In the Capture Menu (see page 62), select Bracketing.
2. Use the
a Bracketing option. If you select
Exposure, use the
select a value (0.3, 0.7, or 1.0).
3. Press
4. Press the Shutter button all the
way down one time to take the
entire 3–shot sequence.
NOTE: Using Flash with Bracketing may result in a delay
between the three shots, depending on lighting. Using
Self-Timer - 2 Shots with Bracketing results in a single
sequence of three shots, the first of which is taken after a
10-second delay.
After the set of images has been taken, each image appears
in Instant Review (see page 117). To delete the set of
images, press , then select Entire Bracketing Sequence in
the Delete sub-menu.
NOTE: Bracketing does not apply in the Panorama modes,
nor while recording video clips. Burst is ignored when
using Bracketing.
66 HP Photosmart R817/R818 User's Manual
buttons to highlight
buttons to
to save the setting.