HP Photosmart R817 User Manual page 100

Ofrecido por www.electromanuales.com
6. To change the settings in the Print Setup menu, use the
buttons on the camera to select a menu option, then
use the
7. When the settings are correct, press
printing.
After connecting the camera to the printer, you can print
either all images in the camera (see page 110) or just
selected images (see page 108). However, printing directly
from the camera has the following limitations:
• A set of images marked as a panoramic sequence print
as individual pictures. For information about printing
entire panoramas, see page 102.
• To print panoramas stitched on camera, transfer the
stitched panoramas to your computer (see page 97).
Alternatively, if your printer can print panoramas and has
a memory card slot, insert the memory card and print
directly from the printer (see your printer manual for
instructions).
• You can print frames saved from video clips (see
page 86), but you cannot print video clips directly from
the camera. If your printer has a memory card slot and
can print video clips, you can insert the memory card
directly in the printer's memory card slot and print the
video clip. See your printer's manual for more
information.
To avoid these limitations, use the HP Image Zone software
(see page 127).
NOTE: If you connect the camera to a non-HP printer and
encounter problems with printing, contact your printer
manufacturer. HP does not provide customer support for
non-HP printers.
100 HP Photosmart R817/R818 User's Manual
buttons on the camera to change the setting.
to begin