Using The Manual Shooting Mode - HP Photosmart R817 User Manual

Ofrecido por www.electromanuales.com

Using the Manual Shooting Mode

Manual mode lets you specify both F-number (aperture) and
shutter speed. Use Manual mode when you want complete
control over aperture and shutter speed.
Changes you make in Manual shooting mode are reflected
in Aperture Priority and Shutter Priority modes. For example,
if you change the F-number to f/8, it will be f/8 in Aperture
Priority mode. Similarly, changes you make in Aperture
Priority and Shutter Priority modes are reflected in Manual
shooting mode.
1. Press
to highlight
2. Press the
between F-number and shutter
speed.
3. Use the
value of the selected option. The
arrow on the exposure meter indicates the amount of over-
or under- exposure. If the image will be over- or under-
exposed more than three stops, the F-number, shutter
speed, and exposure meter arrow turn red. Adjust either
the F-number or shutter speed until these items turn white.
4. When you are done, you can take a picture using these
settings (see page 33).
NOTE: If you are using Manual Focus (see page 43), press
MF to display the magnified screen. You can then use
the
screen times out, you can use the
between F-number and shutter speed.
The Manual mode settings remain in effect until they are
changed again, even when you turn the camera off.
, use the
, then press
buttons to switch
buttons to adjust the
buttons to adjust focus. When the magnified
Taking Pictures and Recording Video Clips
buttons
.
buttons to switch
55