Ae Bracketing - HP Photosmart R707 User Manual

AE Bracketing

NOTE
This setting does not apply in
This setting allows you to take three pictures with the camera,
with each picture set to a different exposure value. When you
select one of the
the camera will take the first picture at normal exposure
exposure value), followed by an underexposed picture at the
negative (-) exposure value in the setting, and finally an
overexposed picture at the positive (+) exposure value in the
setting. The entire sequence of three shots is taken with only
one press of the
want to try underexposing and overexposing a shot to get an
image at the best exposure.
NOTE
Flash is allowed when you select an
setting; however, the interval between each of the pictures
in the sequence of three shots will be longer due to flash
recharging.
NOTE
If you have selected
ignored. Also, when you use
Timer - 2 Shots
essentially ignored and is treated the same as the
Timer mode (only one 3-shot sequence is taken).
1
In the Capture Menu
select AE Bracketing.
2
In the AE Bracketing
use the
highlight a setting.
3
Press Menu/OK
setting and return to the
Menu.
74
AE (automatic exposure)
Shutter button. Use
Burst
set, the Self-Timer - 2 Shots
(page 55),
sub-menu,
buttons to
to save the
Capture
Panorama
Bracketing
AE Bracketing
AE Bracketing
mode, AE Bracketing
AE Bracketing
HP Photosmart R707 User's Manual
mode.
settings,
(0
when you
is
with Self-
setting is
Self-