Processing Documents; Inserting Checks - Epson TM-S1000 User Manual

English

Processing Documents

The TM-S1000 is capable of performing the following four actions on a
document in a single pass: scanning the image of both the face and the
back, reading magnetic characters, and franking.
Flow of Single Pass Processing
1. Insert a document into the feeder section.
2. The scanner scans the images of the face and back.
3. The scanner reads the magnetic characters on the document.
4. The franking section prints a pattern, and the document is fed to the
outlet.
Notes on Processing Documents
❏
Do not use documents smaller than 120 × 68 mm {4.72 × 2.68 in}
(W × H).
❏
Do not use documents larger than 235 × 120 mm {9.25 × 4.72 in}
(W × H).
❏
Do not use documents whose thickness or weight is out of the
specified range.
❏
Do not use copy paper or other multi-ply paper.
❏
Make sure that the documents have no curl, bending (especially on
the corners), warpage, or wrinkles.
❏
Do not use checks with paper clips, staples, adhesive tape, or other
foreign materials attached.
❏
Do not open the covers while processing is in progress.

Inserting Checks

You can put up to 100 documents in the ASF to be fed automatically.
1. Align the documents neatly on the bottom-right corner as shown in
the picture below so that they will be fed one by one.
CAUTION:
If the documents are inserted without being aligned, they may not be
fed at all, or a paper jam or incorrect feeding of multiple documents
may result.
14 TM-S1000 User's Manual
9 0
7 8
5 6
3 4
1 2
0
7 8
3 4
1 2