Epson CaptureOne TM­S1000 Installation Manual

Epson CaptureOne (TM­S1000)
The following steps should be followed for installation of an Epson CaptureOne (TM‐S1000)
scanner
The user installing the scanner on his/her PC should have local administrative rights to the
computer on which the scanner is being installed.
If installing this scanner on a Vista operating system, please read the following paragraph.
When installing this scanner on a computer with a Vista operating system, the user must
be logged in to the computer as an administrator user for the first scan. Also, please
note the following: The Windows Vista 64‐bit Operating System provides 2 versions of
Internet Explorer (IE): a 32‐bit version and a 64‐bit version. The current version of this
driver requires the use of the 32‐bit version of IE or Firefox when running on the
Windows Vista 64‐bit OS.
Users may determine whether or not they are using the 64 bit IE by clicking on the Help
tab in an internet browser window, then choosing the About Internet Explorer option.
Step1
Do not connect the scanner.
Step 2
Open an internet browser and login to CCX. After logging into CCX, there are two methods to
obtain the drivers:
•
Enter the following web address into the address bar:
https://xpress.epaysol.com/drivers/FNIS_Epson_S1000.exe and press "Enter".
Step 3
The user will be presented with a prompt similar to the following screenshot. Select Run.
Installation