Av Input Setup; Av Output Interface Setup - Kenwood DNX571TR Instruction Manual

AV Input Setup

You can set AV input parameters.
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Source].
4
Touch [AV-IN SETUP] in the list.
AV-IN SETUP screen appears.
5
Set each item as follows.
AV-IN Interface*
1
Select the source connected to AV-IN.
Rear Camera: Select when the rear view
camera is connected.
AV-IN (Default): Select when AV device is
connected.
AV-IN1 Name/AV-IN2 Name*
Sets a name to be displayed when you select
a system that is connected via the AV INPUT
port. Default is "VIDEO".
*1 This item can be set when in STANDBY
source.
*2 AV-IN1 Name stays Rear Camera when
selecting Rear Camera in AV-IN Interface.
2

AV Output Interface Setup

You can select an AV source to be output at
the AV OUTPUT port. Default is "VIDEO1".
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [AV-OUT].
AV-OUT Interface screen appears.
4
Touch [2] or [3] to set [AV-OUT] to
VIDEO1, DISC, iPod, USB, Navigation,
or OFF.
NOTE
• Only when iPod is connected to this unit with
KCA-iP202, "USB" can be selected as AV output
source. For the connection setting, refer to
iPhone connection setup
• When selecting the Navigation, there are
limitations below:
- No audio is outputted.
- Video is outputted only when the unit is
displaying Navigation.
Return to the Top page
Setting Up
iPod/
(P.54).
101