Av Input Setup - Kenwood DNX570TR Quick Start Manual

Return to the Top page
Setting Up

AV Input Setup

You can set AV input parameters.
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Source].
4
Touch [AV-IN SETUP] in the list.
AV-IN SETUP screen appears.
5
Set each item as follows.
AV-IN Interface (DNX570TR)
Select the source connected to AV-IN.
Rear Camera: Select when the rear view
camera is connected.
AV-IN (Default): Select when AV device is
connected.
106 106
iPod AV Interface Use/ AV-IN2 Interface*
Sets the terminal which iPod is connected.
Setting values are iPod and AV-IN2.
iPod (Default): Set this when an iPod is
connected using KCA-iP202
connector. You can listen to
audio or watch video in your
iPod as iPod source.
AV-IN2: Set this when an iPod is connected
using KCA-iP102 connector.You can
listen to audio in your iPod as iPod
source. You can also listen to audio or
watch video output from a AV device
as AV-IN2 source.
AV-IN Name/AV-IN2 Name*
Sets a name to be displayed when you select
a system that is connected via the AV INPUT
port. Default is "VIDEO".*
*1 T his item can be set when in STANDBY
source and also the iPod is disconnected.
*2 [ AV-IN2 Name] becomes settable when
"AV-IN2" is selected in [iPod AV Interface
Use].
*3 W hen "Rear Camera" is selected for [AV-IN
Interface], "Rear Camera" is selected as the
default of [AV-IN Name].
1
2
3