Cisco TelePresence C20 Administrator's Manual page 34

Cisco TelePresence System Quick Set C20 and Profiles using C20
Contents
User administration
(page 3 of 4)
Changing user privileges
Follow these steps in order to change the user privileges:
1. Click the name of an existing user to open the Editing
user window.
2. Check the appropriate user roles check boxes, decide if
the user has to change the password and PIN code on
the next sign in, and fill in the Client Certificate DN field if
using certificate login on HTTPS.
3. Click Update User to save the changes.
Use the Back button to leave without making any
changes.
Changing the password or PIN code
Follow these steps in order to change the password or PIN
code :
*
1. Click the name of an existing user to open the Editing
user window.
2. Enter the new password or PIN code in the appropriate
input fields.
3. Click Change Password or Change PIN
change.
Use the Back button to leave without making any
changes.
The password is used with the web interface and command
*
line interface; the PIN code is used with the remote control and
on-screen menu when the Video OSD LoginRequired setting is
switched On.
D14637.17 Profile C20 and Quick Set C20 Administrator Guide TC7.3, JULY 2015.
Introduction Web interface Web interface
Navigate to: Configuration > User Administration
to save the
System settings
www.cisco.com — Copyright © 2010-2015 Cisco Systems, Inc. All rights reserved.
34
Administrator Guide
Setting passwords Appendices