Local Layout Control - Cisco TelePresence C20 Administrator's Manual

Cisco TelePresence System Quick Set C20 and Profiles using C20
Contents

Local layout control

You can choose a local layout using the Call Control page.
The term layout is used to describe the various ways the
videos from the conference participants and a presentation
can appear on the screen. Different types of meetings may
require different layouts.
Whether or not snapshots of input sources are shown as illustrated,
depends on the software version, configuration, and options installed
on the video system. Refer to the About snapshots and remote
monitoring sections (► TC7.3.3 or newer or
D14637.17 Profile C20 and Quick Set C20 Administrator Guide TC7.3, JULY 2015.
Introduction Web interface Web interface
Navigate to: Call Control
Change the layout
Click Change
your preferred layout in the window
that opens.
The set of layouts to choose
from depends on the system
configurations.
You may change the layout while
in a call.
► TC7.3.0 to TC7.3.2).
System settings
layout, and choose
20
Setting passwords
www.cisco.com — Copyright © 2010-2015 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices