Cisco TelePresence C20 Administrator's Manual page 25

Cisco TelePresence System Quick Set C20 and Profiles using C20
Contents
Setting the Administrator Settings
menu password
This password restricts access to the Administrator Settings
menu that is available on-screen when using the remote
control.
When starting up the video conference system for the first
time anyone can access these settings, because the menu
password is not set.
We strongly recommend that you set a menu
password, because the administrator settings may
severely affect the behavior of the system.
Note that the menu password, as from software version
TC7.0, applies only to the on-screen Administrator Settings
menu accessed with a TRC5 remote control; it does not
apply to the Administrator menu on a Touch controller.
You can read more about password protection in the
► Setting passwords chapter.
D14637.17 Profile C20 and Quick Set C20 Administrator Guide TC7.3, JULY 2015.
Introduction Web interface Web interface
Navigate to: Configuration > System Configuration
Changing the menu password
Click Set/Change Administrator
Settings menu password
this dialog.
Enter the new password in the text
input field and click
Click Set without entering
a password to leave the
Administrator menu unprotected
(not recommended).
System settings
to open
Set to set it.
25
Setting passwords
www.cisco.com — Copyright © 2010-2015 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices