Installation And Setup; Attaching The Stand - Panasonic KX-HDV130 Operating Instructions Manual

Installation and Setup

Installation and Setup
Note
R Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out
of improper installation or operation inconsistent with this documentation.
WARNING
R To reduce the risk of fire or electric shock, do not overload AC outlets and extension cords.
R Completely insert the AC adaptor/power plug into the AC outlet. Failure to do so may cause electric
shock and/or excessive heat resulting in a fire.
R Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet,
then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc.
resulting in a fire.

Attaching the Stand

Attach the stand to the desk phone.
1. Insert the stand into the slots located in the unit.
2. Gently rotate the stand in the direction indicated until it is fixed.
Adjusting the Stand Position
Push the PUSH marks in the direction indicated, with both hands, and tilt and slide the stand until it
becomes fixed in the desired position.
50