Battery Faq; Troubleshooting: Battery; The Batteries Drain Within One Day - Weiser Smartcode 10 Programming And Troubleshooting Manual
Weiser smartcode 10 touchscreen electronic deadbolt
Hide thumbs
Also See for Smartcode 10:
- User manual ,
- Installation and user manual (8 pages) ,
- Quick start manual (3 pages)
Table of Contents
Advertisement
5
Troubleshooting: Battery
The batteries drain within one day.
The lock must be replaced. Contact Technical Support.
6
Battery FAQ
How long will the lock operate on a set of
batteries?
Based on 10 operations per day, a single, new set of Alkaline batteries
will operate the lock for over a year.
What type of batteries do you recommend?
For best results, use new non-rechargeable Alkaline batteries only.
I am planning to be away for several months.
Will my lock operate when I get back?
When the system is idling, it consumes minimum power (very close to
battery shelf life.) With alkaline batteries, the lock should be operable
after years of idle.
USA: 1-800-677-5625
Canada: 1-800-501-9471
www.weiserlock.com
I replaced my batteries less than a year ago
and need to replace them again.
Check your door alignment. If the deadbolt makes several unsuccessful
attempts to lock or unlock the door, it may mean that the door is warped
and the latch does not line up correctly with the strike. Operating the
lock excessively reduces battery life. Avoid turning on the keypad light
unnecessarily.
What settings should I use to get the
maximum battery life out of my lock?
Set all switches to the OFF position.
15 / 15
62812 / 01
©2015 Spectrum Brands, Inc.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Smartcode 10 and is the answer not in the manual?
Questions and answers
what would the master code usually be
The Mastercode for the Weiser Smartcode 10 is not set by default. It must be manually enabled and programmed by the user. The Mastercode must be 4 to 8 digits long.
This answer is automatically generated