Troubleshooting: Installation - Weiser Smartcode 10 Programming And Troubleshooting Manual
Weiser smartcode 10 touchscreen electronic deadbolt
Hide thumbs
Also See for Smartcode 10:
- User manual ,
- Installation and user manual (8 pages) ,
- Quick start manual (3 pages)
Table of Contents
Advertisement
2
Troubleshooting: Installation
A
The interior mounting screws are diffi cult to tighten.
B
The interior and exterior assembly won't mount parallel to the door edge.
C
The interior assembly does not fi t on the mounting plate.
If you encounter any of the problems above, the deadbolt latch may be
installed upside down. Remove the interior assembly, mounting plate,
and exterior assembly from the door, and look at the latch inside the
door hole.
If the word "UP" is upside down and at the bottom of the latch, the latch
is installed incorrectly.
Reinstall the latch, making sure the word "UP" faces upward.
USA: 1-800-677-5625
Canada: 1-800-501-9471
www.weiserlock.com
10 / 15
62812 / 01
©2015 Spectrum Brands, Inc.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Smartcode 10 and is the answer not in the manual?
Questions and answers
what would the master code usually be
The Mastercode for the Weiser Smartcode 10 is not set by default. It must be manually enabled and programmed by the user. The Mastercode must be 4 to 8 digits long.
This answer is automatically generated