Page 3
22∗ Misura di corrente: portate 10 A AC+DC (∗) tranne MX 23 1 Borne de entrada [calibres de 12 a 22 (a 20 : MX 23)] 12 Medida de tensión AC: calibres de 5 a 600 V (baja imped.) 2 Entrada de referencia del multímetro 13 Medida de tensión AC+DC: calibres de 5 a 750 V...
RANGE / AC+DC key ....................24 4.1.1. / ADP Position ................24 AC+DC 4.1.2. 500 mA / mA Position (except MX 23) (MX 24 : 50 mA / mA ) .24 AC+DC AC+DC 4.1.3. 10 A Position (except MX 23) ............25 AC+DC 4.2.
Directive WEEE 2002/96/EC. Conforms CE Power supply : 9 V (6LF22) battery Fuse (except MX 23) 1.2. Precautions and safety measures • Read carefully all the notes preceded by the symbol •...
AC+DC 500 mA (or 50 mA : MX 24 and except MX 23), 500 mA AC+DC (or 50 mA : MX 24 and and except MX 23), 10 A , 10 A AC+DC AC+DC (except MX 23). Portable digital multimeters...
∗ Fuses must be replaced (except MX 23) with fuses of the same rating and type. ∗ When the instrument is open, remember that some internal capacitors can retain a dangerous potential even after the instrument is powered down.
Chapter II 1.7. Maintenance and metrological verification Any adjustment, maintenance or repair work carried out on the multimeter while it is live should be carried out only by appropriately qualified personnel, after having taken into account the instructions in this present manual. A "qualified person"...
∗ AC voltage with AC+DC (or TRMS) direct coupling ∗ DC voltage ∗ DC / AC+DC voltage, range 500 mV ∗ AC current with AC+DC (or TRMS) direct coupling (except MX 23) ∗ DC current (except MX 23) ∗ resistance value ∗...
3.4. Multimeter maintenance 3.4.1. Fuse self-test (except MX 23) This check can be carried out with the multimeter in use without opening up the casing. - 0.63 A fuse (F1) : set the rotary switch to the position and short-circuit the 500 mA and VΩ...
Chapter II 3.4.3. Replacing the battery or fuses (except MX 23) Caution ! Disconnect test leads from any circuit under test, turn the meter off and remove test leads from the input terminals . Use the following procedure: 1 - Disconnect test leads from any inputs terminals 2 - Using a appropriate tool, make slide the case bottom of the instrument 3 - Replace the battery or fuse (respect the value and the type).
AC+DC voltage measurement (TRMS) appears on the display. (Range 500 mV AC+DC AC+DC key 4.1.2. 500 mA / mA Position (except MX 23) (MX 24 : 50 mA / mA AC+DC AC+DC 500 mA DC current measurement (Range 500 mA AC+DC key...
AC+DC AC+DC key 4.2. MIN / MAX key (except MX 23) If you press this key (long press), you access the surveillance mode (or coming out), in which minimum (MIN), maximum (MAX) and sliding average (AVG) values of the current measurement are stored (capture time ≤...
Chapter II TECHNICAL SPECIFICATIONS 5.1. General Only the values assigned tolerances or given limits are guaranteed values. Values without tolerances are given for information only, without guarantee (standard NFC 42670). The measurement errors must be considered in an environment of reference temperature (refer to §...
Number of count : 5000 « OL » on the display (range 500 mA (MX 24 : 50 mA ) only) and intermittent signal sounds in case of range overpassing. 5.2.4. AC currents (AC+DC) (except MX 23) Fuses Selector switch Accuracy Max voltage...
Chapter II 5.2.5. Resistance / Continuity test Protection Selector switch Measurement Ranges Accuracy Resolution (∗) position current 500 Ω 0.1 Ω 0.3 % R + 3 D 1 mA 500 Ω 0.1 Ω 1 mA 1 Ω 5 kΩ 100 µA 0.3 % R + 3 D 10 Ω...
Chapter II 5.2.10. Environment Reference temperature : 23° C ± 5° C Limit range of operation : 0° C to 40° C Rated range of use : -10° C to 55° C Storage temperature range : -20° C to 70° C Temperature coefficient : max.
50 A / 50 mV, ± 0.5 % HA050-1 Transport 180 x 265 x 55 multimeter & accessories carrying bag AE0190 Mulimeter soft carrying bag HX0018 280 x 210 x 80 METRIX carrying case, with foam HX0009 Portable digital multimeters...
Need help?
Do you have a question about the MX 23 and is the answer not in the manual?
Questions and answers