Image Is Blurred; Paper Creases - Kyocera FS-1030D Service Manual

2G6
(9) Black dots appear
on the image.
Causes
1. Dirty or flawed drum.
2. Dirty contact glass.
3. Deformed or worn cleaning blade.

(10)Image is blurred.

Causes
1. Deformed press roller.
2. Paper conveying section drive problem.

(11)Paper creases.

Causes
1. Paper curled.
2. Paper damp.
1-5-16
Causes
1. Dirty or flawed drum.
2. Dirty contact glass.
3. Deformed or worn cleaning blade.
Replace the process unit.
Clean the contact glass.
Replace the process unit.
Causes
1. Deformed press roller.
2. Paper conveying section drive problem.
Replace the press roller (see page 1-6-27).
Check the gears and belts and, if necessary, grease them.
Causes
1. Paper curled.
2. Paper damp.
Check the paper storage conditions.
Check the paper storage conditions.
Check procedures/corrective measures
Check procedures/corrective measures
Check procedures/corrective measures