Travis Industries 564 Installation And Owner's Manual page 11

FACE BRACKET INSTALLATION
This fireplace includes brackets to attach the 564 faces listed below to the front of the fireplace. Two
sets of brackets are included to accommodate the different faces. See the list of faces below to
identifiy the correct brackets. Use the nuts included with the face kits to attach the brackets.
BRACKET A

FPX Arched Faces*

FPX Artisan Faces*

French Country Faces*

Rectangular Bevel Faces
* When installed, these faces will have a 3/8"
gap between the face and front of fireplace.
FACE ATTACHMENT
With the fireplace in place, attach the face to the fireplace as shown below.
Lift the face up slightly, tilt
it forward and insert the
top hooks until the face
locks in place.
b
a
Tilt the face back slightly and insert the bottom
hooks into the slots on the fireplace.
BRACKET B

Wilmington Faces

Victorian Lace Faces
NOTE: Bracket B has a large hole.
Victoria Lace
11
(C) Travis Industries
Wilmington
100-01382