5. ASSEMBLY
5-7. Panel
1. Two panel support bracket
4. Cord holder
Install panel
harness.
6. Cord bush
Install panel
harness.
Panel harness
7. 4 pin connector
5-07
2. Panel
5.
Secure the cord in the cord holder after making sure that
it is not excessively loose inside the machine arm. Also
make sure that it does not touch any moving parts such
as the upper shaft and timing belt.
1138S
1137S
LZ2-B855E,B856E
3. Two set screws
8. Tighten six screws
1139S
1134S