Machine Specifications - Brother LZ2-B855E Service Manual

1. MACHINE SPECIFICATIONS

1. MACHINE SPECIFICATIONS
BROTHER INDUSTRIES, LTD.
LZ2-B855E-3
MADE IN JAPAN
Thread trimmer
Upper thread feeding device
Back tack/condense device *1
Thread wiper
Automatic presser foot lifter
*1 ... Used for sewing condensed stitches and backtack stitches.
Use
Maximun stitch length
Max. sewing speed
Sewing pattern
Max. zigzag width
Thread take-up lever
Needle bar stroke
Feed dog height
Presser foot height
Presser foot pressure
Needle
Motor
Power supply
*2 ... If fine adjustments to the stitch length are needed, use "General (foundation)".
*3 ... At the time of shipment from the factory, the maximum sewing speed is set to 4,500 rpm. If you would like to sew
at speeds higher than this, change the setting of the DIP switch inside the control box. (Refer to instruction manual
page 163.)
Furthermore, the maximum sewing speed may be limited by the type of sewing pattern and the zigzag width.(Refer
to instruction manual page 84.)
*4 ... The maximum number of custom-made patterns that can be stored is 99 patterns with a total of 10,000 stitches, at
500 stitches or less per pattern.
*5 ... If you would like to reduce the pressure of the presser foot (such as when sewing light-weight materials), replace
the compression spring with the accessory spring. (Refer to instruction manual page 134.)
1-01
BROTHER INDUSTRIES, LTD.
LZ2-B855E-0/BT
MADE IN JAPAN
<with back tack/condense device *1>
B856E
General
(foundation)
For light-weight materials-medium-weight materials
14 patterns of eight types built-in
(Up to 99 different types of custom-made patterns can be added*4)
Presser bar lifter
Knee lifter
Automatic
Three-phase 400 W induction motor
Single-phase/Eine Phase
Maximum electric power consumption: 600 VA
LZ2-B855E,B856E
BROTHER INDUSTRIES, LTD.
LZ2-B856E-103
MADE IN JAPAN
3
B855E
General
(long stitch)
-1 -3
2.5mm 5mm
5,000rpm*3
10mm (Standard factory setting: 8mm)
Rotary thread take-up
20-60N*5 20-60N
SY 1965 Nm 70/10
4 9
Solenoid
Solenoid
Solenoid
Solenoid
Solenoid
B856E
General General
(foundation) (long stitch)
-M01
2.5mm
33.3mm
1mm
6mm
10mm
7mm
20-60N*5
Schmets
110V, 220V, 230V
-M03
5mm
20-60N