Warning Labels; Finger Guard - Brother LZ2-B855E Service Manual

3

Warning labels

# The following warning labels appear on the sewing machine.
Please follow the instructions on the labels at all times when using the machine. If the labels have been
removed or are difficult to read, please contact your nearest Brother dealer.
1
Hazardous voltage
will cause injury.
Turn off main
switch and wait 10
minutes before
opening this cover.
2
Moving parts
may cause injury.
Operate with safety devices.
Turn off main switch before
changing needle, cleaning
etc.
3
• Be sure to connect the ground. If the ground connection is not secure, you run a high risk of
5
receiving a serious electric shock, and problems with correct operation may also occur.
6 • Direction of operation
iv
Hochspannung Un voltage non adapt
verletzungsgefahr! provoque des blessures.
Bitte schalten sie den Eteindrel'interrupteur et
hauptschalter aus und attendre 10 minutes
warten sie 10 minuten, avantd' ouvrir le capot
bevor sie diese
abdeckung ffnen.
Safety devices
4
LZ2-B855E,B856E
Un voltaje inadecuado
puede provocar las
heridas.
Apagar el interruptor
principal y esperar 10
minutos antes de abrir
esta cubierta.
q Finger guard
w Thread take-up guard cover
e Belt cover
r Belt casting prevention guide
t finger guard, etc.
• If the actuator is pressed by mistake when us-
ing the correction sewing function, the needle
will move in a zigzag motion while the machine
is operating, and injury may result.