5-2. Feed mechanism
Feed base assy
8. Two set screws
(*Temporarily tighten)
* After adjusting the feed dog, tighten the two screws.
Refer to "6-5. Adjusting the forward/back, right/left position of the feed dog" (page 6-03).
3. Feed base assy
6. Set screw collar
(Press right and tighten two set screws)
Felt
Feed rocker shaft
Feed rocker arm
LZ2-B855E,B856E
Lower shaft
4. Feed rocker shaft (Slide left)
(Pull out from the bottom.)
1. Felt
2. Feed lifting link
Spacer
Retaining ring
7. Two set screws
5. ASSEMBLY
1071S
5. Feed rocker shaft (Press left)
1070S
1072S
5-02