Sending Function; Sending A Document - Canon iR7105 Easy Operation Manual

Sending Function

Sending a Document (E-mail, I-fax, File Server)
The following is an explanation of the basic procedure for sending a document. For more detailed procedures, see
the references to other guides.
Preparations
Press [Send] to switch to the Send function.
If the Department ID Management screen is
displayed, enter the [Dept. ID] and [Password].
After entering them, press
touch panel.
If Department ID Management or MEAP
authentication is set, it is necessary to enter an
ID and password. (If an optional card reader is
attached, insert a control card.)
For more information, see Chapter 1, "Before
You Start Using This Machine," in the Reference
Guide.
Registering Destinations
In order to be able to select a destination using
the address book, one-touch buttons, or favorites
buttons, it is necessary to register the destination in
advance. Register destinations using the Additional
Functions screen.
For more information on registering destinations
in the address book, one-touch buttons, or
favorites buttons, see p. 41 and p. 42.
31
(Log In/Out) on the
Place Your Originals
Placed in the feeder
Placed on the platen glass
Place your originals.
When placing originals on the platen glass,
make sure to close the feeder after placing your
originals.
The [Register] button on the Send Basic Features screen
and the Address Book screen is a shortcut to the Additional
Functions screen for storing destinations.
[Reg.] on the Send Basic
Features screen
[Register] on the Address
Book screen