Starting And Stopping - Benassi BL 6000 Instruction Manual

SpA
Whenever you are starting the engine of the machine, follow these instructions very carefully:
•
Check the engine oil level: A BRAND NEW MACHINE IS DELIVERED WITHOUT OIL IN THE ENGINE, THEREFORE YOU SHOULD FILL IT
UP TO THE LEVEL ON THE DIP STICK OF THE OIL CUP.
•
Please read carefully on the booklet the ENGINE USE AND MAINTENANCE concerning the "operations before starting".
•
Start the engine only in open spaces.
CLUTCH LEVER PROVIDED WITH SAFETY DEVICE (see picture 6b)
•
Lever ("A") pulled: to get the lever working release the safety device ("B"), now the clutch is engaged (the tiller moves forward or
backwards depending on the engaged gear)
•
Lever ("B") released: clutch lever disengaged (the tiller stops).
1. Pull the choke lever (Pict.5 Ref. "A").
2. Turn the throttle lever to the "MAX" position (Pict. 6a Ref. "A"). The switch (Ref. "A" Pict.6a) must be "ON".
3. The clutch lever (Pict. 6b Position "A") must be disengaged.
4. Pull the starting rope by the handle (Pict. 5 Ref. "B"), firstly smoothly and then strongly: when you feel some resistance don't lea‐
ve the handle but help the recoiling of the rope with your hand.
5. When the engine runs move the choke lever to the initial position and the throttle lever in the mid‐position (Pict. 6a Ref. "B").
6. To stop the engine move the switch to the "OFF" position (Fig.6a Ref."A").
Pict. 5
B
Pict. 6
Pict. 6a
STARTING AND STOPPING
HONDA
C
B
A
A
KIPOR
A
B
B
Pict. 6b
BL 6000
A
B
A
5