Machine Types 7393, 7394, And 7395; Removing And Replacing The Front Bezel - Lenovo 7387 Hardware Maintenance Manual

10
CMOS battery

Machine Types 7393, 7394, and 7395

1
Microprocessor and heat sink
2
Microprocessor fan connector
3
Memory connector 1
4
Memory connector 2
5
Power connector
6
Diskette drive connector
7
IDE connector
8
SATA IDE connectors (2)
9
Front panel (power switch/LED)
connector
10
Clear CMOS/Recovery jumper

Removing and replacing the front bezel

The front bezel must be removed to replace some FRUs.
1. Remove both the left-side and right-side covers. See "Removing the covers" on page 70.
2. Disconnect the cable for the power switch/LED assembly from the system board. See "Identifying parts
on the system board" on page 71 for the connector location.
3. Remove the screws that secure the bezel. There are two on each side.
20
12V power connector
11
Front USB connectors (2)
12
Serial (COM2) connector
13
Front audio connectors
14
PCI adapter connectors (2)
15
PCI Express x1 graphics adapter connector
16
CMOS battery
17
PCI Express x16 graphics adapter connector
18
System fan connector
19
12V power connector
.
Chapter 8 Replacing FRUs (Types 7387, 7388, 7389, 7393, 7394, and 7395)
73