Turning On The Power; Starting Up For The First Time - Toshiba Portege M930 Series User Manual

Either a 2-pin or 3-pin adaptor/cord will be included with the tablet
depending on the model.
2.
3.

Turning on the power

This section describes how to turn on the power - the Power indicator will
then indicate the status. Please refer to the
section in Chapter 5, Power and Power-Up Modes for more information.
Slide the power switch to turn on the tablet.
1. Power switch

Starting up for the first time

The Windows 7 Startup Screen will be the first screen displayed when you
turn on the power. Follow the on-screen instructions on each screen in
order to properly install the operating system.
User's Manual
Connect the AC adaptor's DC output plug to the DC IN 19V jack on
the left of the tablet.
Figure 1-5 Connecting the DC output plug to the tablet
1. DC IN 19V jack
Plug the power cord into a live wall outlet - the Battery and DC IN
indicators on the front of the tablet should glow.
After you turn on the power for the first time, do not turn it off until you
have set up the operating system.
Volume cannot be adjusted during Windows Setup.
Figure 1-6 Turning on the power
1
2
2. DC output plug
Monitoring of power condition
1
PORTÉGÉ M930
1-6