GeoVision Surveillance System V8.4 Installation Manual page 13

Troubleshooting Power Supply Issues
When the Reset LED on the top of the Card is flashing red color or the four Status LEDs
are not all on, it indicates that the GV-4008 Card is short of power supply. Make sure your
power supply is of 400 watts at least. If not, replace it with the power supply of 400 or larger
watts. The power supply issues should be solved.
Adjusting the Video Settings in the Main System
One distinct feature of GV-4008 Cards is their ability of hardware compression, providing
you with higher system performance and DVD recording quality.
To take full advantage of GV-4008 Cards, you can adjust the video settings, including the
recording quality and frame rate, before running the GV-System.
Set the video settings of the recorded files:
Considering computer performance or recording quality, you may adjust the settings to
meet your needs.
1. On the Main System, click the Configure button, select General Setting, select
Camera / Audio Install, and click Hybrid Camera Install. This dialog box appears.
Figure 1-4
Video Capture Cards
1
9