Setting Parameters To Default Values - Fujitsu ErgoPro e Series Specialist's Handbook

PC Specialist's Handbook
Use the LEFT ARROW and RIGHT ARROW keys to move to and highlight the desired menu, and press the
ENTER or DOWN ARROW key to make a selection.
Press ESC to exit each parameter and each level, e.g., to exit a parameter to the main menu level, press ESC
three times.

Setting parameters to default values

Some screens have the option Set default parameters in the bottom left-hand corner . If you want to set all the
parameters in a screen to their respective factory default values, do the following:
1
Move the cursor to Set default parameters.
2
Press ENTER.
3
An entry window appears prompting you to cancel or confirm your choice.
4
Use the UP or DOWN ARROW keys to select Cancel or OK and press ENTER.
First Edition, Release 4 - June 1998
ErgoPro e-, x- and s- Series
Page 25