Display Service Set Id - D-Link DAP-3520 Command Line Interface Reference Manual

AirPremier N Dual Band PoE Access Point Command Line Interface Manual
get keylength
get ssid
get ssidhidden
get txpower
get wdsinfo
get wdsmac
get wdsscaninfo
get wireless
get wlmode
get wmm
get macclonetype
get maccloneaddr
get mcastrate
get rogue_ap
set acktimeout_a
set acktimeout_g
set ap_band
set apmode
set band
set assoclimit
set authentication
set autoChannel
set beaconinterval
set cipher
set Channeltype
set cwm
set channel
Display encryption key length (in bits)[index: 1--4]

Display Service Set ID

Display SSID hidden
Display TX power
Display WDS info
Display WDS MAC address list
Display WDS site survey info
Display wireless
Display Wlmode
Display WMM
Display MAC address clone type
Display MAC clone address
Display mcast rate
Display Rogue AP List
Set acktimeput in A band (range: 25--200)
Set acktimeput in G band (range: 48--200)
Set ap band (2.4G or 5G)
Set AP operation mode
Set band (0:2.4G, 1:5G)
Set Association Limit
Set authentication type
Set auto channel
Set beacon interval (range: 25--500)
Set Cipher of wep,tkip,aes, or auto
Set Channel type
Set CWM
Set Channel
10