Using The Cli - D-Link DAP-3520 Command Line Interface Reference Manual

AirPremier N Dual Band PoE Access Point Command Line Interface Manual
1
U CLI
SING THE
The DAP-3520 can be accessed by Telnet. Using a Microsoft Windows system as an example, open the Command Prompt on the computer that will be used for
configuring and managing the AP and enter telnet and the IP address of DAP-3520 in the first line. Using the default IP address as example, enter telnet 192.168.0.50 to
cause the following screen to open:
Press Enter in the screen above. The following screen opens:
1