Chapter 3 Preparations; Software Installation; Utility Software; Windows Installation - Sony PDW-1 Operation Manual

Sony pdw-1 professional disc drive unit
Table of Contents

Advertisement

Preparations
3-1 Software
Installation
3-1-1 Windows
Installation

FAM driver

When a computer is connected to this unit
in file access mode (FAM connection), you
can handle video and audio data as files (see
Chapter 4, "Handling Files" (page 31)).
Before making an FAM connection, it is
first necessary to install an FAM driver on
the computer.
To install the PDZ-1 Proxy
Browsing Software
Insert the supplied CD-ROM (XDCAM
Application) into the CD-ROM drive of
your computer, and run the installer in the
PDZ-1 directory.
Follow the instructions that appear on the
screen, and after the PDZ-1 Proxy
Browsing Software is installed, the FAM
driver is installed.
For details, refer to the ReadMe file contained on
the CD-ROM disc.
To install the FAM driver only
Insert the supplied CD-ROM (XDCAM
Application) into the CD-ROM drive of
your computer, navigate to the FAM Driver
Chapter
directory, and run the installer in the
directory for your operating system.

Utility software

You can check the status of this unit, and
change settings, by installing the utility
software on a computer connected to this
unit, and carrying out the operations on the
computer (see Chapter 5, "Using the Utility
Software" (page 39)).
To install the utility software, insert the
supplied CD-ROM (PDW-D1 PC Utility)
in the computer's CD-ROM drive, and copy
all of the following files from the
PC_Utility folder of the Win folder on the
CD-ROM to an appropriate folder on the
computer:
• PC_Utility.exe
• D1_API.dll
• FAM_API.dll
• PC_Utility.chm
For the operating environment required for the
utility software, see page 13.
Notes
• The utility software operates using the
FAM (file access mode) protocol, and
therefore requires the FAM driver to be
installed in the computer (see previous
item).
• Pins 1, 3, and 4 of switch S1401 on the
rear panel of the unit must be set to OFF
(the factory default setting is OFF) to
enable utility software settings. If any of
these pins are in the ON position, return
them to the OFF position.

3-1 Software Installation

3
19

Advertisement

Table of Contents
loading

Table of Contents