Sony PDW-1 Operation Manual page 48

The line mode selected in step 1
becomes available for use.
To change the line mode setting on
a Macintosh computer
1
Refer to "AV setting operations"
(page 47), and change the line mode
setting.
2
Click the Set button.
If a disc is present, it is automatically
ejected.
3
In the confirmation message box, click
the OK button.
4
Click the "Change Connection" button
to switch to "AVc/Log out."
5
Exit the utility software (see page 40).
6
Power the unit off, and then power it
on again.
The line mode selected in step 1
becomes available for use.
Owner setting
When using an extended UMID, set the
following owner information.
Item name
Country code An abbreviated
Organization
code
User code
48 5-3 Details of Functions
Settings
alphanumeric string (up
to four bytes
alphanumeric strings)
according to the values
defined in ISO 3166-1.
A code registered with
the SMPTE registration
office (up to four bytes
alphanumeric strings)
A code for user
identification (up to four
bytes alphanumeric
strings)
Country code
You can find your own country code on the
following web page.
Refer to ISO 3166-1:
http://www.iso.ch/iso/en/prods-services/
iso3166ma/02iso-3166-code-lists/list-
en1.html
Organization code
• Organization codes must be acquired by
applying to the SMPTE registration
office.
• When no organization code has been
acquired, it is forbidden to enter an
arbitrary string. As a rule, the code "00"
must be entered. Freelance operators who
do not belong to an origination should
~
enter " ."
• There are no problems in recording or
playing back audio-video signals, if an
organization code is not set.
User code
• The user code is registered with each
organization locally. It is usually not
centrally registered.
• This user code is determined by the
organization. The methods used depend
on the organization.
• User code cannot be entered when no
organization code has been entered.
Owner information setting
operations
To enter owner information: Using the
keyboard, enter alphanumeric
characters in the edit box for each item.
If an entry is less than four bytes, the
remainder is filled with space
characters (20h).
To enter the country code by selecting
from a list: On the right of the edit
box, click the ... button, to open a
country selection dialog box. Select a
country by name from the list in this
dialog box, and click the 3-character or
2-character button.