Sony PDW-1 Operation Manual page 46

TIME CODE
Item name
VITC
VITC
OUTPUT
a) This is supported from firmware version 1.4.
VIDEO CONTROL
Item name
a)
WIDE MODE
Sub-item
1 INPUT
46 5-3 Details of Functions
Settings
Specify whether or not
to record the VITC
generated by the
internal time code
generator.
ON: Record internally
generated VITC.
OFF: Do not record
internally
generated VITC.
Select whether to output
VITC or the time when a
clip was recorded into
VITC during playback.
VITC: Output VITC.
TIME: Output the time
when a clip was
recorded.
Settings
Specify whether to
record with the
addition of wide picture
information.
Specify whether to
save wide picture
information to the disc
during recording.
AUTO: Automatically
record wide
picture information
when it is detected
in the selected
input video signal.
ON: Always record
wide picture
information.
OFF: Do not record
wide picture
information.
a) This is supported from firmware version 1.4
and utility software version 1.10.
AUDIO CONTROL
Item name Settings
DV AUDIO Select the audio
OUTPUT signals to assign to
SELECT i.LINK(AV/C) audio
output channels.
Sub-item
1 CH1/CH2 tr1/2: Tracks 1 and 2
tr3/4: Tracks 3 and 4
tr5/6: Tracks 5 and 6
tr7/8: Tracks 7 and 8
2 CH3/CH4 tr1/2: Tracks 1 and 2
tr3/4: Tracks 3 and 4
tr5/6: Tracks 5 and 6
tr7/8: Tracks 7 and 8
DV OUT Select the audio mode
AUDIO MODE
for S400 (i.LINK)
connector (output).
2ch: 16 bit/48 kHz/2ch
4ch: 12 bit/32 kHz/4ch
assigned to audio
output channels 1
and 2.
assigned to audio
output channels 1
and 2.
assigned to audio
output channels 1
and 2.
assigned to audio
output channels 1
and 2.
assigned to audio
output channels 3
and 4.
assigned to audio
output channels 3
and 4.
assigned to audio
output channels 3
and 4.
assigned to audio
output channels 3
and 4.