Preparations; Installation; Connection Example; Ethernet Interface Ports Of The Pcu - Sony CSM-100BS Operating Instructions Manual

Preparations

Installation

A technician specially trained for CSM system and
PetaSite-series equipment must perform setting and
wiring the units, and making system environment
settings.

Connection Example

This is an example of the system to completely back
up 2 terabytes of data in eight hours.
Application
server
HP-UX
Network 500 GB
PetaSite S200
series (PetaSite
Control Unit
built-in)
Application
NAS server server
NetApp filer SUN Solaris
1 TB 500 GB
Fibre Channel switch
PetaServe/PetaBack
software for CSM
Ethernet Interface Ports of the
PCU
The PCU has two Ethernet interface ports: one for the
local network to control the PetaSite system, and
another for the network for the other system other than
PetaSite.
PCU Rear Panel
Ethernet interface port to control the PetaSite system
Ethernet interface port to control the other system
Port for the PetaSite system network
Be sure to connect the units for this system only to the
network to be used to control the PetaSite system.
Caution
For your safety, connect the LAN port only to a
network with surge protection.
Port for the system other than PetaSite
For setting this port, ask the network administrator for
the IP address.
For settings, see "Setting the host name and IP address of
the PCU" on page 14(E).
13(E)