Lenovo 3425 Hardware Maintenance Manual page 57

Lenovo computer hardware user manual
Hide thumbs Also See for 3425:
Table of Contents

Advertisement

Diagnostic error code
006-197-XXX Diskette interface test warning
006-198-XXX Diskette interface test aborted
006-199-XXX Diskette interface test failed, cause
unknown
006-25X-XXX Diskette interface Error
015-000-XXX USB port interface Test Passed
015-001-XXX USB port presence
015-002-XXX USB port timeout
015-015-XXX USB port external loopback failure
015-027-XXX USB port configuration/setup error
015-032-XXX USB port device controller failure
015-034-XXX USB port buffer allocation failure
015-035-XXX USB port reset condition detected
015-036-XXX USB port register error
015-040-XXX USB port IRQ failure
015-195-XXX USB port test aborted by user
015-196-XXX USB port test halt, error threshold exceeded
FRU/Action
1. If a component is called out, make sure it is
connected and/or enabled
2. Re-run test
3. Replace the component that is called out in warning
statement
4. Replace the component under test
1. If a component is called out, make sure it is
connected and/or enabled
2. Flash the system and re-test. See "Updating
(flashing) BIOS from a disc" on page 99
3. Go to "Undetermined problems" on page 64
1. Go to "Undetermined problems" on page 64
2. Flash the system and re-test
3. Replace component under function test
1. Diskette drive cable
2. Diskette drive
3. System board
No action
1. Remove USB device(s) and re-test
2. System board
1. Remove USB device(s) and re-test
2. System board
1. Remove USB device(s) and re-test
2. System board
1. Flash the system. See "Updating (flashing) BIOS
from a disc" on page 99
2. System board
System board
1. Reboot the system
2. Flash the system and re-test. See "Updating
(flashing) BIOS from a disc" on page 99
3. Run memory test
4. System board
1. Remove USB device(s) and re-test
2. System board
System board
1. Run setup and check for conflicts
2. Flash the system. See "Updating (flashing) BIOS
from a disc" on page 99
3. System board
Information onlyRe-start the test, if necessary
1. Press F3 to review the log file
2. Re-start the test to reset the log file
Chapter 7
.
Symptom-to-FRU index
51

Advertisement

Table of Contents
loading

This manual is also suitable for:

535439805214Thinkcentre a58e

Table of Contents