Installing And Configuring System Software; Reconfiguring The Dos Partition; Installing Unixware 7 Software Without The Nec Securaid 210 Or 530 (Mylex Acceleraid 250 Or 1100) Disk Array Controller; Installing Unixware 7.0 Software On A Scsi Hard Disk Drive - NEC SERVER HX4500 Configuration Manual

Hide thumbs Also See for SERVER HX4500:
Table of Contents

Advertisement

Installing and Configuring System Software

This section contains supplemental information for installing and configuring
UnixWare 7.0.

Reconfiguring the DOS Partition

If you want to reconfigure the size of the DOS partition, See Appendix A
"Reconfiguring the DOS Partition".
Installing UnixWare 7 Software
without the NEC SecuRAID 210 or 530 (Mylex AcceleRAID 250 or
1100) Disk Array Controller
Read the Release Notes (packaged with your operating system documentation)
before starting the installation.
Follow the UnixWare 7 installation instructions in the UnixWare 7 System
Installation Guide to install this operating system. Supplemental installation
instructions are found in the following sections. The UnixWare 7Installation
Guide includes an installation checklist to assist you in installing or upgrading to
UnixWare 7.
Note: The boot floppy should be the one generated from
the E
boot prompt.
Once the installation is complete, including all additional options, such as
Symmetrical Multiprocessing (if required), the maintenance supplement should
be added. Installation of involves using the software manager and a set of four
diskettes generated from the E

Installing UnixWare 7.0 Software on a SCSI Hard Disk Drive

1. Insert the Installation Diskette 1 into your diskette drive A and boot up your
system.
2. At the first screen displayed, select the correct language.
Press ENTER.
3. When requested, insert Installation Diskette 2.
Press ENTER.
4. At the "Welcome" screen press F10 for a first time install.
5. Select a correct "zone" (In USA, select Americas).
Press F10.
6. Choose a language (In USA, select English for USA).
CD and no defbootstr is required at the
B
XPRESS
UILDER
XPRESS
Installing and Configuring SCO UNIXWare 7.0 5-5
B
CD.
UILDER

Advertisement

Table of Contents
loading

Table of Contents