NEC SERVER HX4500 Configuration Manual page 59

Press F10.
22. At "System owner name" screen, supply: name, login name, System owner
ID: 101, System owner password, Repeat Password.
Press F10.
23. Enter the Root Password.
Press F10.
24. At Optional Services.
Press F10.
25. At License agreement choose "accept."
Press F10.
26. At "Installation"
Press F10.
This concludes the installation of UnixWare 7 onto and SCSI hard disk drive.
Remove the diskette and reboot the UnixWare 7 operating system from the
system drive you just installed.
It is recommended that any additional software packages be installed at this
time.
Note: Do not change the system drive 0 (boot drive)
cache policy to write-back until after the installation
completes.
Installing and Configuring SCO UNIXWare 7.0 5-7