Front Panel Connectors - DFI COM330-B User Manual

Front Panel Connectors

4 1 4 1
5 ON 5 ON
HDD-LED - HDD LED
This LED will light when the hard drive is being accessed.
RESET SW - Reset Switch
This switch allows you to reboot without having to power off the system.
PWR-BTN - Power Switch
This switch is used to power on or off the system.
PWR-LED - Power/Standby LED
When the system's power is on, this LED will light. When the system is in the
S0 ,S1 (POS - Power On Suspend), S3 (STR - Suspend To RAM) state, it will be
always light. When the system is in the S4 (STD - Suspend to Disc), S5 state, it
will be light off.
Pin
N. C. 1
HDD-LED
3
5
7
RESET SW
9
N. C. 11
Pin Assignment
N. C. PWR-LED
PWR-BTN
HDD Power
Signal
Ground
RST Signal
N. C. Key
Hardware Installation
HDD-LED
RESET-SW
11
12
PWR-LED
PWR-BTN
Pin
Pin Assignment
2
LED Power
4 LED Power
6
Signal
8
Signal
10
Ground
12
Key
2
1
2
45