Wake-Up Test - DFI COM330-B User Manual

2
Hardware Installation

Wake-up Test

4
5
This jumper is used to simulate the signal status that indicates the wake-on-ring
or PME# event from the Super I/O. It is also used to simulate a general purpose
wake-up signal such as wake-up on PS/2 keyboard or PS/2 mouse. Set J24 pins
1 and 2 to On to send WAKE# signal to the module.
24
1 4 1
5
ON ON
1 2
J24
1-2 On:
Wake-up test
1 2
1-2 Off: Normal
(default)