Using Additional Handsets - BT Home SmartPhone S User Manual

Using additional handsets

As your BT Home SmartPhone S works with
GAP, you can register up to six GAP handsets
to your base to extend your phone system
without installing telephone extension sockets
for each new phone.
If a handset becomes unregistered, you need to
register it to the base again.
You have one minute to complete the
registration process.
To re-register your handset to the base
1 Touch System setttings.
Touch Handset & base.
2
Touch Handset settings.
3
4 Touch Registration.
Select a base to register to.
5
Touch Register.
6
7 On the back of the base station press and
hold the registration button (see page 5)
8 The handset shows 'registration successful'
If registration doesn't work the first time, try
again in case the base registration period ran
out of time.
If you've already registered six GAP handsets
to the base, the registration will fail. You need
to de-register another handset before you can
register the new one.
Registering another make of handset to your
BT Home SmartPhone S base
If you want to register another make of handset
(because it's not a BT Home SmartPhone S
handset) to your BT Home SmartPhone S base,
you need to:
follow the registration instructions that
•
came with the handset
then continue with the base part
•
of registration
Note: if you register other types of handset,
not everything will work. For example, so you
might only be able to make and receive calls
on the additional handset, and you can't use
the Answer phone (as it's part of your BT Home
SmartPhone S system).
If you need some help, call us on 0808 100 9889* or go to bt.com/producthelp
62