Toshiba GSC-R60 Service Manual page 38

Step Figure
21
A332
22
23
24
25
26
27
Discription
The Lens block is fixed with
screws A331 and A332.
A331
Connect the FPC from the Lens
Module ASSY (HA52) to Main
Cover ASSY (U001).
Install the FLASH PCB ASSY
(UA51) to the Flash Palte ASSY
(AC12) with a screw A324.
Install the JACK PCB ASSY
(U002) to the Flash Plate ASSY
(AC12) with screw A324*2.
Install the Microphone Plate
(A152) with the screw A331.
Install the FLASH PCB ASSY
(UA51) and JACK PCB ASSY
(UA02) to the Flash Plate ASSY
(AC12) and set the Main Cover
ASSY (AA01) with the screw A326
as shown.
Fix the Microphone Plate (A152)
and Flash Plate ASSY (AC12) with
the screws A326*2.
Use screw A331 for Lens side and
screw A332 for LCD side.
Check that the insulated sheet
(two sheets) is stuck on the Flash
Plate ASSY (AC12).
Don't insert the wire of a FLASH
PCB ASSY (UA51).
Be careful to the overlap of parts
as shown.
37
Remark