Cannot Print This Paper Size Select The Other Drawer - Toshiba e-Studio 351c Operator's Manual For Basic Function
Toshiba e-studio series multifunctional digital colour system
Hide thumbs
Also See for e-Studio 351c:
- Printing manual (382 pages) ,
- Operator's manual for basic function (372 pages) ,
- Operator's manual (370 pages)
Table of Contents
Advertisement
11. "Cannot print this paper size Select the other drawer"
When the finisher is installed, A3-Wide paper cannot exit to the receiving tray.
When this message appears, delete the print job, change the paper size you set for printing or specify the
finisher as an exit tray, and try again.
Printing can be performed without deleting the print job in the following two ways. However, some parts of
the original image may be missing because the paper size smaller than A3-Wide will be used in both
cases.
•
Select a drawer button to be set as a paper source on the touch panel, and press the [START] button.
•
Place paper other than A3-Wide size on the bypass tray and press the [START] button.
Be sure to specify the paper size.
10
342
10.WHEN THIS MESSAGE APPEARS
Advertisement
Table of Contents
