Toshiba e-Studio 351c Operator's Manual For Basic Function page 274

6.Error Code (Cont.)
Error code
2D43
2D60
2D62
2D63
2D64
2D65
2D66
8
2D67
2D68
2DA8
2DC0
2DC1
Store to e-Filing
2B10
2B11
2B20
2B21
2B30
272
8.JOB STATUS
Problem
Encryption error. Failed
to create file.
Failed to copy file
Failed to connect to
network destination.
Check destination path.
Specified network path
is invalid. Check desti-
nation path.
Logon to file server
failed. Check username
and password.
There are too many
documents in the folder.
Failed in creating new
document.
Failed to process your
job. Insufficient storage
space.
FTP service is not
available.
File sharing service is
not available.
The HDD is running out
of capacity for the
shared folder.
Job cancelled.
Power failure occurred.
There was no applica-
ble job.
Job status failed.
Failed to access file
Message size
exceeded limit or maxi-
mum size
Insufficient disk space
Perform the job in error again.
If the error still occurs, turn the power OFF and then back ON.
Perform the job in error again.
Turn the power OFF and then back ON. Retry the scan. If the
error still occurs, contact your service representative.
Check destination path.
Make sure that the network path is correct, and retry the scan. If
the error still occurs, ask your administrator to confirm whether
the IP address or path of the server is correct. Also make sure
that the server is operating properly.
Make sure you specify correct network folder and retry the scan.
Make sure you specify correct user name and password to
logon the file server and retry the scan.
Delete the data in the local storage folder in the equipment and
retry the scan.
Delete the data in the local storage folder in the equipment and
retry the scan.
Ask your administrator whether the FTP service is configured
correctly.
Ask your administrator whether the SMB protocol is enabled.
Delete the unnecessary data in HDD.
Job was cancelled.
Make sure that the power cable is connected properly and it is
inserted securely. Resend the job.
Turn the power OFF and then back ON. Retry the scan. If the
error still occurs, contact your service representative.
Turn the power OFF and then back ON. Retry the scan. If the
error still occurs, contact your service representative.
Turn the power OFF and then back ON. Retry the scan. If the
error still occurs, contact your service representative.
Fragment the message into several smaller-sized ones and
send them again.
Delete unnecessary documents in e-Filing and try again.
What to do