Preface - Toshiba e-Studio 351c Operator's Manual For Basic Function

Preface

Thank you for purchasing the Toshiba Multifunctional Digital Colour Systems e-STUDIO281c/351c/451c.
This Operator's Manual describes the following:
• How to use the Multifunctional Digital Colour Systems.
• How to inspect and carry out maintenance on the Multifunctional Digital Colour Systems.
• How to remedy mechanical and copying problems.
Before using the Multifunctional Digital Colour Systems, thoroughly read and understand this Operator's
Manual. To ensure that clean copies are made at all times and to keep your Multifunctional Digital Colour
Systems in optimum working order, this Operator's Manual should be readily available for future reference.
To ensure correct and safe use of the Toshiba Multifunctional Digital Colour Systems e-STUDIO281c/
351c/451c, this Operator's Manual describes safety precautions according to the following three levels
of warning:
Before reading this Operator's Manual, you should fully understand the meaning and importance of
these signal words.
• Warning
Indicates a potentially hazardous situation which, if not avoided, could result in death, serious injury,
or serious damage, or fire in the equipment or surrounding assets.
• Caution
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate
injury, partial damage of the equipment or surrounding assets, or loss of data.
• Note
Indicates information to which you should pay attention when operating the equipment.
• Tip
Describes handy information that is useful to know when operating the Multifunctional Digital Colour
Systems.
©2005 TOSHIBA TEC CORPORATION All rights reserved
Under the copyright laws, this manual cannot be reproduced in any form without prior written permission of
TOSHIBA TEC CORPORATION. No patent liability is assumed, however, with respect to the use of the
information contained herein.
9