5-6. Connecting Or Replacing The Battery
5-7. Electronic Fuel Injection (EFI) System And Battery Information
NOTICE − EFI system components can be damaged if these precautions are not followed:
S
Do not allow the battery cables to touch opposing terminals. When connecting the battery cables attach the positive (+) cable to the positive (+)
battery terminal first, followed by negative (−) cable to negative (−) battery terminal.
S
Never start the engine when the cables are loose or poorly connected to the battery terminals.
S
Never disconnect the battery while the engine is running.
S
Never use a quick battery charger to start the engine.
S
Do not charge battery with Engine Control switch On.
Always disconnect the negative (−) battery cable before charging battery.
S
OM-249 795 Page 24
.
Complete Parts List is available at www.MillerWelds.com
1
!
Connect negative (−) battery
cable last
To connect battery, open side access
doors.
1
Battery Holddown
To change battery, remove rear pan-
el with baffle and battery holddown.
Be sure battery cables and fuel tank
vent hose are not pinched when in-
stalling battery and replacing rear
panel.
−
+
Tools Needed:
1/2, 3/8 in.
250 916-A / Ref. S-0756-D