Paper Does Not Feed Correctly; Power And Control Panel Problems; Power Does Not Turn On; Lights Came On And Then Went Out - Epson printer User Manual

User's Guide

Paper Does Not Feed Correctly

Check the following if the paper jams, paper feeds at a slant, several sheets of paper feed at a time, no paper feeds,
or paper is ejected.
❏ Place the printer on a flat surface and operate in the recommended environmental conditions.
❏ Use paper supported by this printer.
❏ Follow the paper handling precautions.
❏ Load paper in the correct direction, and slide the edge guide against the edge of the paper.
❏ Do not load more than the maximum number of sheets specified for the paper. For plain paper, do not load
above the line indicated by the triangle symbol on the edge guide.
❏ Load one sheet of paper at a time when loading multiple sheets of paper.
❏ When multiple sheets of paper feed at once during manual 2-sided printing, remove any paper which is loaded
in the paper source before you reload the paper.
❏ Load and eject paper without printing to clean the paper path.
❏ If you have opened the printer cover during printing, close it immediately. If printing is paused, the paper is
ejected.
Related Information
"Environmental Specifications" on page 95
&
"Paper Handling Precautions" on page 21
&
"Available Paper and Capacities" on page 22
&
"Loading Paper in the Rear Paper Feed" on page 24
&
"Cleaning the Paper Path" on page 67
&

Power and Control Panel Problems

Power Does Not Turn On

❏ Hold down the
P
button for a little longer.
❏ Make sure the power cord is securely plugged in.

Lights Came On and then Went Out

The printer's voltage may not match the outlet rating. Turn off the printer and unplug it immediately. Then check
the label on the printer.
Caution:
!
If the voltage does not match, DO NOT PLUG YOUR PRINTER BACK IN. Contact your dealer.
Solving Problems
83