Table of Contents
Advertisement
4.3 Motherboard BIOS settings
The POS terminal has a BIOS (Basic Input Output System) chip on the
motherboard. Every time you start the terminals, the system will first run the
BIOS self-test routine to check the main components of the system to ensure it
is working properly.
The terminal is loaded with default BIOS settings in the factory. Please do not
change the parameters in the BIOS unless necessary.
In the following situations, you need to run the BIOS setup:
1) Error message appears on the screen during the system self-test and
requested to enter BIOS setup.
2) If you need to change the factory default settings to customized application
requirements (for example, boot device priorities).
Control keys
[↑]
Move up to previous item
[↓]
Move down to next item
[←]
Move left to previous menu
[→]
Move right to next menu
[Enter] Select this option/sub-menu
[Esc]
Exit the menu
[+]
Increase the option value or change selection
[-]
Reduce the option value or change selection
[F1]
Help
[F2]
Restore previous values
[F3]
Load default settings
[F4]
Save & Exit
17
Advertisement
Table of Contents
