Sleep Mode - ADC 6016 Instruction Manual

Attention!
• fter the battery warning appears, the device will not function until
the batteries have been replaced.
• Use "
able batteries is not recommended.
• If the blood pressure monitor is left unused for long periods, remove
the batteries from the device. NOTE: This will delete all memory.
Functional Check:
Press and hold the 0/I (ON/OFF) button to test all the display ele-
ments. When the device is functioning correctly, all display elements
will be properly displayed.

5.2. Sleep mode

If this device is loaded with batteries, it will remain in sleep mode
when not in use (It will not turn off completely unless the batteries are re-
moved). In this mode, the time and user icon will be displayed. You can
conduct the following operations during this mode.
• Reading the set date: Press the
TIME buttton. The date set will be
displayed for 2 seconds.For more
information, refer to Section 4.3.
• Recalling the measurements: Press
the MEMORY button. The stored
V function measurement (average
of all previous measurements) will be
displayed first. For more information,
refer to Section 5.7.
" Long-Life or lkaline 1.5V Batteries. The use of recharge-