ADC 6016 Instruction Manual page 15

5) Press the TIME button again. The last two
characters (day) are now blinking
6) The corresponding day can now be entered by
pressing the MEMORY button.
(Example: 19 presses advances 19 days)
7) Press the TIME button again. The display now
switches to the time, with the blinking charac-
ter representing the hour.
8) The corresponding hour can now be entered by
pressing the MEMORY button. (Example: 9
presses advances 9 hours)
9) Press the TIME button again. The last two
characters (minutes) now blink
10) The exact time can now be entered by press-
ing the MEMORY button. (Example: 30 presses
advances 30 minutes).
NOTE: Go past 12 for PM time.
11) fter all settings have been made, press the
TIME button once again. The date is briefly dis-
played and then the time. The input is now
confirmed and the clock begins to run.