Measuring Procedure - ADC 6016 Instruction Manual

6.5. Measuring Procedure

a) Once you've selected the correct user, and
measurement mode you can press the 0/I
(ON/OFF) button to begin. fter you press the
0/l button the pump begins to inflate the cuff.
In the display, the increasing cuff pressure is
continually displayed.(Fig. 1)
b) fter reaching the inflation pressure, the
pump stops and the pressure slowly falls. The
cuff pressure (large characters) is displayed
during the measurement. When the device has
detected the pulse, the heart symbol in the
display begins to blink and a beep tone is au-
dible for every pulse beat. (Fig. 2)
c) When the measurement has been con-
cluded, a long beep tone sounds. The meas-
ured systolic and diastolic blood pressure
values, as well as the frequency, are now dis-
played. (Pulse=number of heartbeats each
minute) Example (Fig. 3): Systolic 118, Dias-
tolic 73, Pulse 75. The measurement results
are displayed, until you switch the device off.
If no button is pressed for 5 minutes, the device
switches to sleep mode automatically.
Fig. 1
Fig. 2
Fig. 3